Product description
FT-52 truss is constructed of main chords (50 x 3 mm) and diagonal members (30 x 2 mm – 25 x 2 mm).
Equipped with the CCS7 conical coupling system, the FT-52 truss is fast and easy to assemble.
The FT-52 truss offers a strong truss with a very high loading capacity; the FT-52 has a 4-sided webbing, making it strong in a vertical and horizontal plane.
The folding truss offers low transport volume combined with ultimate strength.
FT-52 truss is not available as circular truss.
Facts
Tüv certification only valid for loading table above.
Loading figures are only valid for static loads.
Loading figures are only valid for single spans with supports at both ends.
All static systems, other than single spans, need an individual structural calculation. Please contact a structural engineer or Prolyte B.V. for assistance.
Loading figures are calculated according to and in full compliance with European standards (Eurocode).
The self-weight of the trusses is already taken into account.
Loading figures are only valid for the cross sectional of the truss as shown by the icon in the loading table.
The interaction between bending moment and shear force at the connection point is already taken into account.
Truss spans can be assembled from different truss lengths.
Fast and easy to assemble
Very high loading capacity
Low transport volume
Optimum strength
TECHNICAL SPECIFICATIONS
Height
510 mm / 20.08 in
Width
510 mm / 20.08 in
Main Tube
50 x 3 mm / 1.97 x 0.12 in
Braces
50 x2 mm /1.97 x 0.08 in
Snakebrace
30 x 2 mm /1.18 x 0.08 in
Weight
~14,6 kg/m /~32,19 lbs/ft
Pin Position
Diagonal
Material
Intemational-6082 T6
Connection
CS1-CON
Loading charts
